This section describes the most basic connection possible: connecting systems using a null-modem serial cable, which directly connects the serial ports on twoĪn available serial (COM) port on the host systemĪn available serial (COM) port on a client system After logging into the portĬoncentrator, you can select a host system to manage using console redirection. You can also connect the client system to a port concentrator that can access numerous host systems using a shared modem. You can use console redirection for tasks such as configuring BIOS or RAID settings. Positive and negative x, y, and z axes (one pulse onĮach side of the system) of 71 G for up to 2 msĬonsole redirection allows you to manage a host (local) system from a client (remote) system by redirecting keyboard input and text output through a serial Six consecutively executed shock pulses in the One shock pulse in the positive z axis (one pulse onĮach side of the system) of 41 G for up to 2 ms NOTE: For additional information about environmental measurements for specific system configurations, May reach 25 A per power supply for 10 ms or less. System ambient operating range, the inrush current Under typical line conditions and over the entire Two RJ-45 (for integrated 1-Gigabit NICs)ĪTI Radeon 7000-M video controller VGA connectorsĨ4 -264 VAC, autoranging, 47-63 Hz, 10.1 A Up to six 1-inch, internal, hot-plug, Ultra320 SCSI One 3.3-V, 64-bit, 100-MHz or three 3.3-V, 64 bit,ġ44-bit ECC registered PC2-3200 DDR2 SDRAMĭIMMs, with two-way interleaving, rated for 400-MHzĢ56 MB, 512 MB, 1 GB, 2 GB, or 4 GB (when available) Up to two Intel® Xeon™ processors with a minimum Proprietary interest in trademarks and trade names other than its own. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. UNIX is a registered trademark of The Open Group in the United States and other countries. Intel is a registered trademark and Xeon is a trademark of IntelĬorporation Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation Novell and NetWare are registered trademarks of Novell, Inc. Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks of Dell Inc. Reproduction in any manner whatsoever without the written permission of Dell Inc. Information in this document is subject to change without notice. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.ĬAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.įor a complete list of abbreviations and acronyms, see the Glossary. NOTE: A NOTE indicates important information that helps you make better use of your computer. Using the Dell OpenManage Server Assistant Dell™ PowerEdge™ 2850 Systems User's Guide

Dell asset tag utility